Grand to Grand Technical Services Co provides dryer repair (تصليح نشافات) in Dubai for vented, condenser and heat pump tumble dryers, and for washer-dryers. Our certified, in-house technicians fix dryers that won’t heat, won’t turn, stop mid-cycle, overheat or take too long to dry. Most repairs are done on the same day, usually in one to two hours on site, and every part we replace has a 30-day warranty.
Dryer repair at a glance
- Types: vented, condenser and heat pump dryers, and washer-dryers
- Time: same day for most faults, usually 1–2 hours on site
- Visit and diagnosis: AED 100–150, depending on distance (waived if you go ahead with the repair)
- Price: fixed quote before any work starts
- Warranty: 30 days on every part we replace
- Hours: open 24 hours, all of Dubai
Common Dryer Problems We Fix
Dryer running but not heating
The most common cause is a blown thermal fuse, the safety part that cuts the heat when the dryer gets too hot. Other causes are a failed heating element or a faulty thermostat. A fuse that keeps blowing usually means the airflow is blocked, so we check the lint path and vent too, not just the fuse.
Dryer not turning on
Often a faulty door switch, a blown fuse or a failed start relay. In older buildings, a voltage spike can also damage the control board.
Drum not turning
Usually a worn or snapped drive belt, a failed drum roller or idler pulley, or a seized motor. If the motor hums but the drum doesn’t move, switch the dryer off. A stuck motor can burn out.
Overheating, burning smell or stopping mid-cycle
These almost always point to restricted airflow: a full lint filter, a blocked exhaust hose or vent, or a dusty condenser. The high-limit thermostat then cuts power to protect the machine. A failing cycling thermostat or motor can cause the same thing. If you smell burning, stop using the dryer and call us. Built-up lint is a real fire risk.
Clothes taking too long to dry
A partly blocked vent, a dusty condenser or a weakening heating element are the usual reasons. Dubai’s fine dust makes all three happen faster.
Loud banging, squealing or rumbling
Worn drum bearings, a damaged drum roller, or a loose or fraying belt. A coin or zip caught in the drum can also cause a rattle.
Condenser dryer not emptying the water tank
Usually a condenser blocked with dust and fluff, or a failed drain pump. If the “tank full” light stays on with an empty tank, the float or sensor may be stuck.
Door not closing, and error codes
A worn door catch, a damaged hinge or a broken seal stops the safety switch from engaging, so the dryer won’t start. Digital dryers also show error codes. Some common ones are listed below.
What Our Dryer Repair Covers
- Heating element and thermal fuse replacement
- Thermostat and high-limit thermostat testing and replacement
- Drive belt, drum roller and idler pulley repair
- Motor and motor capacitor testing and replacement
- Lint filter housing and exhaust vent inspection and clearing
- Condenser cleaning and drain pump repair (condenser dryers)
- Door catch, hinge and seal repair
- Control board (PCB) diagnosis and replacement

Dryer Error Codes: LG and Samsung
These are some of the codes we see most on LG (إل جي) and Samsung (سامسونج) dryers in Dubai. Meanings can vary by model, so check your manual or send us a photo of the display on WhatsApp.
| Brand | Code | What it usually means |
|---|---|---|
| LG | d80 / d90 / d95 | Exhaust vent blocked (about 80%, 90% or 95%): clear the vent and hose |
| LG | tE1 / tE2 | Temperature sensor (thermistor) fault |
| LG | HS | Moisture sensor fault |
| LG | dE | Door open or door switch fault |
| Samsung | tS / tO | Temperature sensor (thermistor) fault |
| Samsung | HE / hE | Heating fault or overheating |
| Samsung | dE / dC | Door open or door switch fault |
| Samsung | 9C1 | Power supply (voltage) problem |
Quick Checks Before You Call
- Clean the lint filter after every load.
- Condenser dryer: empty the water tank and rinse the condenser if your model lets you remove it.
- Vented dryer: check the exhaust hose isn’t squashed, kinked or full of fluff.
- Close the door firmly and check the plug and the socket switch.
- Don’t overload the drum. Overloading slows drying and strains the belt and motor.
Why Dryers Fail Faster in Dubai
- Heat: a dryer makes its own heat, and in summer it often works in a laundry room that is already very hot. Thermostats and thermal fuses trip more often and wear out sooner.
- Fine dust: dust gets into the drum, vents and condenser. It coats filters and heat exchangers, slows drying, pushes temperatures up and can trip the safety cut-outs.
- Condenser dryers in apartments: many Dubai apartments can’t vent a dryer outside, so condenser and heat pump models are common. Their condensers collect dust and moisture every cycle and need regular cleaning.
- Voltage problems in older buildings: spikes can damage the control board. A surge protector or stabiliser is worth it for expensive appliances.
How Much Does Dryer Repair Cost in Dubai?
The visit and diagnosis charge is AED 100–150, depending on how far you are from Deira (waived if you go ahead with the repair). After the diagnosis, you get a fixed price for the repair, and nothing starts until you agree. The cost depends mainly on the part: a thermal fuse or belt costs much less than a motor or control board.
Repair or Replace Your Dryer?
In most cases, repair is the better choice. A dryer with one failed part, such as a belt, thermal fuse or thermostat, usually has years of use left after the repair. If the dryer is old and needs an expensive part, our technician gives you an honest view of the cost against its condition, so you don’t replace it too early or spend too much on it.
Dryer Repair for Homes and Businesses
Apartments and villas
Most people get a warning before the dryer stops: longer drying times, a faint burning smell or a louder drum. Call us at that point, before a small fault becomes a big one. Our technicians bring the common parts for dryer models sold in the UAE, so most faults are fixed in one visit. If you have a washer-dryer, our washing machine repair covers the washing side too.
Hotels, laundries, salons and shared laundry rooms
Commercial dryers run many cycles a day, and a breakdown quickly delays room turnovers and laundry orders. We give commercial calls priority, work outside business hours, and repair heavy-duty dryers from brands including Miele Professional, Electrolux Professional and Primus, as part of our commercial appliance repair service.
Dryer Brands We Repair
Samsung · LG · Bosch · Siemens · Whirlpool · Miele · Electrolux · Beko · AEG · Candy · Ariston · Zanussi · Haier · Hoover · Indesit, and most other brands sold in the UAE, including older models. Our brands we repair page has the full list.
Why Choose Us for Dryer Repair
- Same-day repair for most dryer faults
- Certified, in-house technicians, never outsourced
- Condenser cleaned and checked on every condenser dryer we repair
- Genuine or OEM-equivalent parts and a fixed price before work starts
- 30-day warranty on every part we replace.
- Open 24 hours, including emergency repairs
Areas We Cover
From our base in Al Khabaisi, Deira, we cover all of Dubai, including Deira, Al Rigga, Al Muraqqabat, Al Qusais, JLT, JVC, Dubai Marina, Business Bay, The Greens and Motor City. Our Dubai service areas page lists every area we cover.
What Our Customers Say on Google
Dryer Repair FAQs
How much does dryer repair cost in Dubai?
The visit and diagnosis charge is AED 100–150, depending on distance (waived if you go ahead with the repair). After diagnosis you get a fixed price for the repair, and no work starts until you agree. A thermal fuse or belt costs much less than a motor or control board.
Why is my dryer running but not heating?
Most often the thermal fuse has blown because the dryer overheated. A failed heating element, a faulty thermostat or a blocked vent can also be the cause. We find the exact fault and also check the airflow, so the new fuse doesn’t blow again.
How do I know if my dryer vent is blocked?
Clothes take much longer to dry, the outside of the dryer feels very hot, there’s a burning smell, or the dryer shuts off before the end of the cycle. On LG dryers, a d80, d90 or d95 code also means a blocked vent. Stop using the dryer and get the vent cleared, because lint build-up is a fire risk.
Why does my dryer stop in the middle of a cycle?
It is usually protecting itself from overheating. A full lint filter, a blocked vent or a dusty condenser makes it too hot, and the thermostat cuts the power. A faulty cycling thermostat or a struggling motor can also cause it.
Why is my condenser dryer taking longer to dry clothes?
The condenser collects dust and fluff every cycle, and in Dubai it fills up faster. A blocked condenser slows drying and makes the motor run longer. Rinse it regularly if your model allows it. Our technicians clean and check the condenser whenever we repair a condenser dryer.
Is it worth repairing a dryer that is more than five years old?
Usually, yes. A five-year-old dryer with one failed part, such as a belt, fuse or thermostat, normally has years of use left after the repair. The technician gives you an honest view of its condition before any work starts.
Can voltage problems damage my dryer?
Yes. Voltage spikes in some older buildings can damage the control board on a modern dryer. If your dryer stopped responding after a power cut, the board is one of the first things we check. A surge protector or stabiliser helps prevent it.
How long does a dryer repair take?
Most dryer repairs are finished in one visit, usually in one to two hours. If a part has to be ordered, we tell you the expected time when we give you the quote.
Dryer Not Heating or Not Turning? Book a Repair Today
Tell us the brand, the problem and your area, and we’ll send a technician, usually the same day. Open 24 hours.

